lntegrated closed-loop stepper motor-NEMA17



       Technical data

        General
Description
Host
PC,PLC,MCU
Support motor
2-phase stepper motor
The development environment
VC C# Labviwe VB Linux Python
The power supply voltage
DC12-48V
Output Current
DC1.2A L=33mm
DC1.5A L=40mm
DC1.6A L=47mm
DC1.8A L=60mm
Microstepping
0/256adjustable
Encoder type
incremental
Encoder resolution
Optional 200-2000, software 4 times frequency processing (commonly used 1000)
Temp.Range
-20℃-80℃
Maximum pulse frequency
200K
Torque
0.17N.m L=33mm
0.26N.m L=40mm
0.29N.m L=47mm
0.44N.m L=60mm
Weight
0.3kg L=33mm
0.34kg L=40mm
0.4kg L=47mm
0.5kg L=60mm
Dimension
42mm*42mm
Durability
Over 20,000 hours

        The input
 General I/O
Description
IO function
Emergency stop input, brake control, digital input/output, analog input, factory reset, 5V output
The input specifications
Digital input voltage: 0-5V
Analog speed regulation input voltage: 0-3.3V
Emergency stop input voltage: 0-24V

        Control mode

Description
Control mode
Position mode, speed mode, PV mode, PP mode, PVT mode, analog speed regulation, analog positioning, synchronous positioning
Mode switching
Specified instruction switching

        Communication
 
Description
Protocol
CANopen DS301/DS402
Baud rate
5k-1M bps

     Size

        The torque curve

        Download
CAD
.DWG
3D file
.STP
The user manual
Debug software
Development of the document
Certificate
CE

        selection guide

       Functional features
Function
Description
S-curve acceleration and deceleration automatic control
Support separate configuration of starting speed, stopping speed, acceleration and deceleration. Acceleration and deceleration support 8-gear control. Acceleration and deceleration simulation diagram is as follows
PVT multi-axis interpolation
It supports precise control of the position and speed of multiple axes on the same time coordinate, so that the end mechanism can realize straight line, arc and complex curve motion trajectory, as shown in the figure below
PP model
In the process of PP mode operation, a set of new parameters can be written by the host computer. It can be selected to smooth the transition from the previous operation parameters to the new parameters, or to run with the new parameters after the operation of the old parameters, as shown in the figure below