lntegrated open-loop stepper motor-NEMA23



        Technical data

        General
Description
Host
PC,PLC,CPU
Support motor
2-phase stepper motor
The development environment
VC C# Labviwe VB Linux Python
The power supply voltage
DC12-48V
Output Current
DC2.8A L=56mm
DC3.0A L=76mm
DC3.5A L=84mm
DC3.8A L=100mm
DC4.0A L=112mm
Microsteppingt
0/256adjustable
Temp.Range
-20℃-80℃
Maximum pulse frequency
200K
Torque
1.19N.m L=56mm
1.89N.m L=76mm
2.75N.m L=84mm
2.98N.m L=100mm
3.3N.m L=112mm
Weight
0.78kg L=56mm
1.14kg L=76mm
1.25kg L=84mm
1.52kg L=100mm
1.73kg L=112mm
Dimension
56.4mm*56.4mm
Durability
Over 20,000 hours

        The input
 General I/O
Description
IO function
Emergency stop input, brake control, digital input/output, analog input, factory reset, 5V output
The input specifications
Digital input voltage: 0-5V
Analog speed regulation input voltage: 0-3.3V
Emergency stop input voltage: 0-24V

     Control mode

Description
Control mode
Position mode, speed mode, PV mode, PP mode, PVT mode, analog speed regulation, analog positioning, synchronous positioning
Mode switching
Specified instruction switching

        Communication
 
Description
Protocol
CANopen DS301/DS402
Baud rate
5k-1M bps

        Size

       The torque curve

        Download
CAD
.DWG
The 3 d file
.STP
The user manual
Debug software
Development of the document
Certificate
CE

        selection guide

       Functional features
Function
Description
S-curve acceleration and deceleration automatic control
Support separate configuration of starting speed, stopping speed, acceleration and deceleration. Acceleration and deceleration support 8-gear control. Acceleration and deceleration simulation diagram is as follows
PVT multi-axis interpolation
It supports precise control of the position and speed of multiple axes on the same time coordinate, so that the end mechanism can realize straight line, arc and complex curve motion trajectory, as shown in the figure below
PP model
In the process of PP mode operation, a set of new parameters can be written by the host computer. It can be selected to smooth the transition from the previous operation parameters to the new parameters, or to run with the new parameters after the operation of the old parameters, as shown in the figure below