Miniature DC Motor Drive Controller

Miniature DC Motor Drive Controller PMC002C5S

PMC002C5S
√ wide range of 9-36v single voltage supply

√ output current 0.4-5A adjustable phase current by commands

√ automatic control of S curve acceleration and deceleration

√ start speed and stop speed can be configured bu command

√ support 300-3000RPM closed loop speed control

Description

PMC002C5S is a kind of miniature DC motor drive controller, which can be directly used to directly drive all kinds of brush DC motors within 5A. The series controller provides control based on CAN bus. Using PMC002C5S DC motor drive controller, it is easy to achieve industrial control network of as many as 120 nodes, which can achieve closed-loop control based on encoder according to the requirements of user. PMC002C5S adopts industrial standard CANOPEN DS301 control protocol, which not only greatly simplifies the complexity of the upper layer control system, but also maximally reserves flexibility of control, and is suitable for all kinds of high precision, wide range of industry using.

Technical data

General

	PMC002 bus series
Host	PC,PLC,MCU
Support motor	Brush DC Motor，Hollow cup motor
The development environment	VC C# Labviwe VB Linux Python
The power supply voltage	DC 9-36V
Output Current	DC 0.4-5A
Speed range	300-3000RPM
Temperature	-40℃~80℃
Supported Encorder	Incremental encorder 20-2000cpr
Durability	Over 20,000 hours

The input

General I/O	Description
IO function	Emergency stop input, brake control, digital input/output, analog input, factory reset, 5V output
The input specifications	Digital input voltage: 0-5V Analog speed regulation input voltage: 0-3.3V Emergency stop input voltage: 0-24V

Communication

	Description
Protocol	CANopen DS301
Baud rate	5k-1M bps

Demension

Miniature DC Motor Drive ControllerPMC002C5S

Download

CAD	.DWG
3D file	.STP
The user manual	pmc002c5s_user_manual_v0.2.1 (1).pdf
Debug software	PUSICAN_V1.0.50.rar
Development of the document	PUSICAN_customer_20190305.rar
Certificate	CE

Selection guide

Functional features

Function	Description
S-curve acceleration and deceleration automatic control	Support separate configuration of starting speed, stopping speed, acceleration and deceleration. Acceleration and deceleration support 8-gear control. Acceleration and deceleration simulation diagram is as follows
Multiple Automatic Protection Functionn	Supporting over-temperature, over-current, under-voltage and over-voltage protection
Program burning and writing offline execution	Users can edit the control functions they want to achieve in the offline control interface, and the control can be executed offline without communication