- Welcome to Pulse Robot
- +86-23-63207381
- +8613677602178
- sales@pusirobot.com
Micro Five-axis stepper motor controller PMC005B3
PMC005B3
√ wide range of 9-36v single voltage supply
√ 0.1A-2.5A per axis
√ Support 4(stepper motors) +2(DC brush motors /solenoid valves) at the same time
√ 0/2/4/8/16/32 microstepping
√ support for 2 limit switches per axis
Description
PMC005xx was designed to allow the rapid implementation of multi axis stepper motor solutions, which can be controlled by USB interface or RS485 network. PMC005xx stepping motor controller can provide parallel control of five-axis stepping motor, 0.1 ~ 2.5A continuously adjustable peak current per axis, at maximum 32 microstepping, with built-in acceleration and deceleration, self-protection and sensor control. It is especially suitable for compact multi-axis automation instruments and equipment.
Technical data
General
|
PMC005Bx bus series
|
|
| Host |
PC,PLC,MCU
|
| Support motor |
2-phase 4-wire 1.8°/0.9° stepper motor
|
| The development environment |
VC C# Labviwe VB Linux Python
|
| The power supply voltage |
DC 9-36V
|
| Output Current |
DC 0.1-2.5A/axis |
| Microstepping |
0/2/4/8/16/32 adjustable
|
| Temperature |
-40℃~80℃
|
| Support number |
Suppport 5 stepper motors/ 4 stepper motors +2 solenoid valves at the same time
|
| Closed-loop control |
Two-axis closed-loop control (incremental 200-4000 PPR) optional
|
| Limit switch |
Each axis supports two external limit switches (upper and lower limits)
|
| Durability |
Over 20,000 hours
|
The input
| General I/O |
Multi-axis Stepping Motor Driver Series
|
| I/O function |
External stop input, brake control, digital input/output, external encoder, factory reset, USB interface
|
| The input specifications |
Digital input voltage：0-5V
Analog speed regulation input voltage：0-3.3V External stop input voltage：0-5V |
Control mode
|
Multi-axis Stepping Motor Driver Series
|
|
| Support control mode |
Position mode, speed mode
|
| Mode switching |
Specified instruction switching
|
communication
|
Multi-axis Stepping Motor Driver Series
|
|
| Protocol |
RS485 or MicroUSB
|
| Baud rate |
9.6K-115.2Kbps
|
Dimension
Five-axis stepping motor controller
Download
| CAD |
.DWG
|
| The 3D file |
.STP(contact customer service)
|
| The user manual | |
| Debug software | |
| Certificate |
selection guide
Functional features
| Function |
Description
|
| Multi-Axis |
Maximum five axis stepper motor parallel control, or four axis stepper motor + two axis dc brush control
|
| Multiple 485 bus network control |
Maximum 16 sets of network control, communication distance up to 1200 meters
|
| Standardized command structure |
Using the string-based DT communication protocol, it consists of an Alpha character representing the command followed by a numeric value representing the parameter value
|