- Welcome to Pulse Robot
- +86-23-63207381
- +8613677602178
- sales@pusirobot.com
Integrated open-loop stepper motor
Torque
NEMA 17
L=33mm 0.17N.m
L=40mm 0.26N.m
L=47mm 0.29N.m
L=60mm 0.44N.m
Torque
NEMA 23
L=56mm 1.19N.m
L=76mm 1.89N.m
L=100mm 2.98N.m
L=112mm 3.3N.m
Torque
NEMA 34
L=65mm 2.4N.m
L=80mm 3.3N.m
L=118mm 6.0N.m
L=156mm 8.7N.m
Technical data
General
|
PMC007 bus series
|
|
| Suitable for upper computer |
Computer PLC single chip microcomputer
|
| Form a complete set of motor |
Stepper motor
|
| The development environment |
VC C# Labviwe VB Linux Python
|
| The power supply voltage |
DC12-48V
|
| The largest segment |
0/256 adjustable
|
| Temperature resistance |
-40℃~80℃
|
| Maximum pulse frequency |
200K
|
| Durability |
Over 20,000 hours
|
The input
| General I/O |
Main product series
|
| Function |
External stop input, electromagnetic brake control, digital input/output, analog input, factory reset, 5V output, digital ground
|
| The input specifications |
Digital input voltage: 0-5v
Analog speed regulation input voltage: 0-3.3v External limit input voltage: 0-24v |
Control mode
|
|
Main product series
|
| Support control mode |
Position mode, speed mode, PV mode, PP mode, PVT mode, analog speed regulation, analog positioning, synchronous positioning
|
| Mode switching |
Specified instruction switching
|
Communication
|
Main product series
|
|
| Agreement |
CANopen DS301/DS402
|
| Baud rate |
5k-1M BPS continuously adjustable/ 9.6K-115.2K bps adjustable
|
Download
| CAD |
.DWG
|
| 3D file |
.STP
|
| The user manual | |
| Debug software | |
| Development of the document | |
| Certificate |
Functional features
| Function |
Describe
|
| S-curve acceleration and deceleration automatic control |
Support separate configuration of starting speed, stopping speed, acceleration and deceleration. Acceleration and deceleration support 8-gear control. Acceleration and deceleration simulation diagram is as follows
|
| PVT multi-axis interpolation |
It supports precise control of the position and speed of multiple axes on the same time coordinate, so that the end mechanism can realize straight line, arc and complex curve motion trajectory, as shown in the figure below
|
| PP model |
In the process of PP mode operation, a set of new parameters can be written by the host computer. It can be selected to smooth the transition from the previous operation parameters to the new parameters, or to run with the new parameters after the operation of the old parameters, as shown in the figure below
|