Pipeline microfluidic pressure sensor PAS0700
$58.00
PAS07xx is a pipeline microfluidic pressure sensor, which can be controlled by CAN/RS485 network, or output pressure value through an analog interface. This series of sensors adopts a special liquid circuit design, has the smallest liquid retention, and has a high pressure sensitivity. A special filter is integrated inside, which can filter and compensate for pressure deviation, temperature drift, and nonlinearity. , Suitable for pipeline pressure monitoring of various analytical instruments and laboratory equipment.,Solve the problems of air suction, needle blockage, clot, overpressure burst pipe, etc. in the liquid path, and can also be used to distinguish different density media in the pipeline
Pipeline microfluidic pressure sensor PAS0700
Description
Technical data
General
Description
|
|
Host |
PC PLC MCU
|
Development environment |
VC C# Labview VB Linux Python
|
Supply voltage |
DC7-30V
|
Output trigger |
Digital level
|
Measurement accuracy |
+/-2%Fspan
|
Full range temperature drift |
+/-0.03%FS
|
Response time |
2ms
|
Detection channel |
1
|
Temperature range |
-10 ℃ to 70℃
|
Durability |
Over 20,000 hours
|
Interface definition
Interface |
Description
|
Analog type |
VCC: Dc power supply,7-30V GND:Ground AN:Analog voltage output |
RS485 type |
Updating
|
CAN bus type | Updating |
Communication
Description
|
|
Protocol |
CANopen DS301/DS402
|
Baud rate |
5K-1Mbps
|
Dimensions
Selection guide
Analog signal output characteristics
Weight | 0.03 kg |
---|---|
Dimensions | 3 × 2.9 × 2.9 cm |
Controller model | PAS0700 |
You must be logged in to post a review.
Reviews
There are no reviews yet.