RC010 Regeneration Clamp For DC-Input Device
$43.00
when the motor is decelerating under load, the kinetic energy of that load is transferred back through the drive electronics to the power supply connection. This increase in voltage can trip the overvoltage protection of a switching power supply and the excess energy will be transmitted back to the driver, causing damage to the driver or power supply. The RC010 regeneration clamp is designed to solve this problem by absorbing the regenerated energy in the capacitor and shunting excess energy through the power resistor.
RC010 Regeneration Clamp For DC-Input Device
Technical data
General
|
RC010 series
|
|
| Supply Voltage |
DC 12-80V
|
| Input Voltage |
12-80V
|
| Output Voltage |
12-48V |
| Ambient Temperature |
0-55℃
|
| Maximum Interface Current |
0-3A
|
| Absorbed Power |
10W
|
| Durability |
Over 20,000 hours
|
Interface
|
RC010 series
|
|
| J1 |
GND：DC power input negative pole
VDD：DC power input positive pole |
| J2 |
VDD：Output positive pole
GND：Output negative pole |
LED Status
| LED |
Status
|
Green |
Power supply voltage exists， solid when powered on
|
| Red |
It is off when working normally, solid when starting protection
|
Dimension
Download
| The user manual | |
| Certificate |
Selection Guide
Functional Features
| Function |
Description
|
| Power protection |
Overvoltage and reverse voltage protection are provided at the inputs. Under overvoltage conditions, the internal circuitry of the module will prevent a higher regenerative voltage from being fed into the input supply, as shown below
|
| Weight | 0.5 kg |
|---|---|
| Dimensions | 4.4 × 4.4 × 3.18 cm |
You must be logged in to post a review.
Reviews
There are no reviews yet.