Micro stepping motor driver PMD006



        Technical data

       General
Description
Development environment
PLC .MCU
Support motor
2-phase stepper motor
The power supply voltage
DC9-48V
Output Current
DC0.4-6A
Microstepping
0/128adjustable
Temp.Range
-20℃-80℃
Maximum pulse frequency
250K
Durability
Over 20,000 hours

        The interface definition
Interface
Description
J1
ENA+-:Enable signal, optocoupler input, not enable on conduction
PUL+-:Pulse signal, optocoupler input
DIR+-:Direction (or pulse) signal, optocoupler input
The interface voltage:5V
J2
M10,M11:Step motor A phase
M20,M21:stepper motor B phase
J3
VCC:DC power supply
GND:Ground

        Demension

       Signal port connection mode
Connection
Wiring diagram (when the output voltage of the controller is within 5V, the resistance R can be omitted)
Common anode
This connection current flows in from the driver's + port, out from the signal-port, and into the controller's ground
Common cathode
This connection is suitable for connecting controller OC/OD output
The differential connection
This kind of connection method is suitable for long line connection in harsh environment, and can significantly improve the signal transmission distance and anti-interference ability

        Download
CAD
.DWG
The 3 d file
.STP
The user manual
Debug software
None
Development of the document
None
Certificate

        Selection guide

       Functional features
Function
Describe
Maximum 128 microstepping
Maximum support 128 adjustable microstepping
External adjustment of working/idle current
The driver supports the external knob mode to adjust the working current and idle current